|
|
| |
PolyethyleneWaxes: Polyflo
| Polyflo® are low molecular weight polyethylene waxes derived
from HDPE. They are hard, crystalline materials that melt to
a low viscosity. They do not contain any chemical functional
groups. The product range is obtained using different distillation
conditions.
These products can be used in many applications, including:
hot melt adhesives, inks, paints and coatings, textiles, plastics
lubrication, color concentrates and as an additive in wax
blends.
|
|
|
Please send us an email request for information on a wax
for your particular requirement.
|
| |
Method |
Polyflo 200 |
Polyflo 300 |
Polyflo 400 |
Polyflo 500 |
| Softening point, °F |
ASTM D36
|
230 |
241 |
240 |
242 |
| Color (Gardner) |
ASTM D1544
|
|
1 |
1 |
1 |
| Penetration at 77 °F, dmm |
ASTM D1321
|
3-6 |
4 |
1 |
5 |
| Viscosity at 300 °F, cP |
ASTM D3236
|
10-25 |
24 |
25 |
23 |
| Flash point (Close cup), °F |
ASTM D93
|
- |
277 |
410 |
244 |
| Flash point (Open cup), °F |
ASTM D92 |
>350 |
370 |
478 |
360 |
|
| |
| Polyflo® products comply with 21 CFR, Parts 172.886, 172.888,
175.105, 175.125, 175.300, 175.320, 176.170, 176.180, 177.1210,
178.105 and comply with the guidelines of GMP as outlined in
21 CFR Part 110. |
|
| |
|
| Moore
& Munger, Inc. |
| A Wholly Owned Subsidiary of Sasol
Wax (USA) Corp. |
| Two
Corporate Drive, Suite 434 |
| Shelton,
Connecticut 06484 |
| Tel.:
203-925-4300 |
| Fax:
203-926-9844 |
| Email: wax@mooremunger.com |
| |
|
Use of this Web site is regulated by our
Copyright Notice and
Legal Disclaimer
Site by MotherMedia
LLC.
|
|
